KONO DEERE / KD-T4018

Telehandler4,000 kg · Rated load

KD-T4018 telehandler with a 4,000 kg rated load, 18 m maximum lift height and 85 kW engine. 4-section telescopic boom, four-wheel drive and front-wheel, four-wheel and crab steering.

Enquire about KD-T4018 ↗Watch product video ▷

4,000 kgRated load

18 mMaximum lift height

85 kWRated engine power

01 / KD-T4018

KD-T4018

Shared telehandler series demonstration. Configuration shown may differ; refer to the model-specific technical table.

Open video directly ↗Download video ↓

02 / KD-T4018

Technical specifications

KD-T4018 specifications for the configuration shown. Final configuration and technical data are confirmed in the order.

Technical specifications / PDF ↗PDF ↓ EN

01Load & lift
Rated load	4,000 kg
Maximum lift height	18 m
Telescopic boom sections	4
Fork length and type	1,220 mm sliding forks

02Engine & controls
Engine - configuration shown	Yuchai
Rated engine power	85 kW
Hydraulic control	Load-sensing electro-proportional multiway valve system

03Chassis & configuration
Drive	Four-wheel drive
Steering modes	Front-wheel / four-wheel / crab
Transmission	High/low-range transmission, 4 forward / 4 reverse gears
Tire size	17.5-25 tubeless
Quick coupler	Hydraulic
Frame material	355 manganese-steel plate
Boom material	BS1000 steel
Single-axle load rating (supplier figure)	15,000 kg

Technical configuration / English

Standard configuration

LED work lights
Window-breaking hammer
Fire extinguisher
Rear sliding window
10-inch driving/reversing camera display
Electronically controlled travel
Automatic fork levelling
Four-wheel drive
Front-wheel, four-wheel and crab steering modes
Plate-fin radiator
Fore-aft adjustable steering column with large instrument housing
Adjustable deluxe operator seat
Protected Xiangliu hydraulic hoses
Frame made from 355 manganese-steel plate
BS1000 steel telescopic boom
1,220 mm sliding forks
Deluxe cab
Colour LCD display
Multimedia system
Rear and front-right cameras
Air-braked axles
Load-moment limiting system
Heating and cooling air conditioning
Stabilizer legs
Frame tilt function
Cast-iron counterweight

Available options

Engine alternatives: China II — Cummins 4BT3.9-C125 93 kW; Euro III (exact non-road stage not confirmed) — Cummins QSB3.9-C125 93 kW; EU Stage V — Perkins / Yuchai 81 kW / YUNNEI 85 kW / Fiat 90 kW; EPA4 / US EPA Tier 4 — Perkins / Cummins QSF3.8 / Fiat 90 kW. Options are supplier-listed alternatives. Exact engine, emissions documentation, compatibility and final configuration require order confirmation.
Domestic closed-loop hydrostatic system (travel pump, piston pump and travel motor)
Danfoss closed-loop hydrostatic system (travel pump, piston pump and travel motor)
Zhuoshibo wet-brake axles, including braking system
Diesel cab heater

03 / FAQ

Before you enquire

Which configuration is shown?

The technical table lists the supplied configuration. Engine alternatives, attachments and final specifications are confirmed in the order. Request the model-specific load chart for permitted load at each height and reach. Rated load and maximum lift height are separate specifications.

How is the final configuration confirmed?

Share your destination, application and configuration requirements. The final technical specifications confirmed in your order shall prevail.